Automatic Systems Laboratories

page location: home > precision thermometers > f200

Precision Thermometers

F200 Series Precision Thermometers

Features

  Bullet

Accuracy: ±0.01°C over full range

  Bullet

Resolution: 0.001°C

  Bullet

Range: -200°C to +850°C

  Bullet

Stability: <0.005°C per year

  Bullet

SMART probe option

 

F200 BrochurePDF Document (PDF, approx 628KB)

 

For more information about this product contact ASL

 

F200 Precision Thermometer
Dotted line

New F201 3/4 wire PRT Precision Thermometer

New High Performance 2 or 8 channel, 3 and 4 wire Precision Digital Thermometers for use with calibrated and uncalibrated Pt100 probes, with great new features for increased usability and lower life-costs.

Using calibrated probes with the F200 thermometer series you choose between storing calibration data into memory in the instrument or into the probe's proprietary “SMART” connector. Calibration data stays permanently with the probe in this connector, which the F200 series instantly recognizes, ensuring best measurement accuracy. Better yet, the ASL SMART connectors use the ASL standard 5-pin DIN connector, so you can use probes with normal, passive connectors on the same input. How's that for versatility.

Using a built-in calibration routine, the operator can re-calibrate the F200 instrument range using a calibrated, traceable reference resistor. This feature is password protected.

Other features have been included for F200 range when using SMART probes, like the Temperature Watchdog and the Calibration Status Monitor. The Temperature Watchdog, continuously monitors the temperature of SMART probes and, if any are used outside their specified working range, the probe history record is updated. This way you can see at a glance if your probes have ever been used outside their calibrated range, as this may affect their calibration validity. The Calibration Status monitor alerts you with an on-screen message when a SMART probe is due for recalibration

F200 Series Precision Thermometer Features

Dotted line

See the table below for a run-down of this product's features and capabilities.

Range

-200°C to +850°C, depending on PRT used.

Accuracy

F200 only:

<±0.01°C (±10mK)

F200 + T100-250

±25mK (-50°C to +250°C)

F200 + T100-450

-70°C (±45mK), -40°C to +250°C (±25mK),+250°C to +450°C (±100mK)

F200 + T100-650:

-189°C to 420°C (±20mK), +420°C to +550°C (±35mK)

F201 only

<±0.05°C (±50mK)

Resolution

0.001°C

Repeatability

±2 least significant digits (±0.002°C), included in accuracy

Stability

Long term: typically <0.002W per year (<0.005°C for Pt100)

Temperature co-efficient

<0.00005°C per °C ambient change

Data entry format

ITS90 coefficients, Callender van Dusen coefficients, or EN60751 for un-calibrated probes

Probe Current

1 mA constant current source

Probe Types

Pt100 to EN60751 with nominal R0=100W and 25W high alpha probes up to 0.00392

Cable length

Maximum 100 metres of 4-core 19/0.15 SPC/PTFE screened cable

Thermometer input connectors

2 off (2 ch.) or 8 off (8 ch.) 5 pin industrial DIN socket can be used with passive or proprietary “Smart connector”

Communications

Galvanically isolated RS232C: 4KV isolation. Baud rate 9600.

Operating conditions

0°C to 50°C, 10-90% RH non-condensing

Power Requirements

90 to 264VAC universal IEC 320 input on rear panel, 47-63 Hz, 30VA max

Weight

1 kg (2.2 lbs)

   

For more information about this product contact ASL

 

Hartest Precision Instruments